A1
Hotmelt 519 Natural Edge Banding Adhesive 1 Kg
Product Code:SKT-8698815893485
Free shipping over 2,000 ₺
Return and exchange within 10 days (EXCEPT FOR SPECIALLY SIZED PRODUCTS)
ADD TO BASKET
Sepetinize Özel Fırsat! FESCH Genel Amaçlı Şeffaf Silikon 280grMitreApel Hızlı Yapıştırıcı 200ml %5 İndirimli!
Hemen Sepetine Ekle ve Bu Fırsatı Kaçırma!
These products will be added to your cart along with the item you are viewing!
Total
Product Description
A1 Hotmelt 519 Natural
It is a synthetic resin and EVA based, thermoplastic hotmelt adhesive.
USAGE PLACES:
A1 Hotmelt 519 is an adhesive used for adhering PVC and Melamine edgebanding in edgebanding machines.
TECHNICIAL SPECIFICATIONS:
Colour: Natural
Shape: Granule
Brookfield Viscosity: 100000±25000 mPa.s (spindle 29 50 rpm at 190ºC)
Softening Point: 100±4ºC
APPLICATION:
Moisture in Material: 8–10%
Humidity in Air: 65-75%
Material and Environmental Temperature: > 15 ºC
Tank Temperature: 190 – 210 ºC
Roller Temperature: 190 – 210 ºC
PACKAGING:
1 Kg. In Paper Bags
METHOD OF APPLICATION:
During application, it is recommended that the ambient temperature be more than 15°C, the humidity rate in the air should be 65-75% and the material moisture should be between 8-10% so that the adhesive is spread over the entire side of the surface to be adhered.
ADVICES:
Unwanted oil and dust prevent the formation of a solid bond on the surfaces and the desired strength cannot be achieved.
Attention should be paid to the temperature inside the glue tank, and the temperature of the glue should be determined at regular intervals, especially during weather and seasonal changes, with heat measuring devices.
The temperature of the environment and the surfaces to be bonded must be above 15°C.
Otherwise, a healthy adhesion cannot be achieved as the glue will freeze faster than the desired time in the application.
The tank should be cleaned at regular intervals.
The amount of glue applied to the surfaces may vary depending on the types of materials to be bonded. Results such as applying too much or too little glue on the surface may occur. In such cases, it is recommended to make glue adjustments.
In case of a break in the work, the glue temperature should be reduced to 100-110°C, thus ensuring that the glue in the chamber does not burn and its performance continues with high efficiency.
Shelf life is 12 months at room temperature (18-20°C).
Comment
There are no comments for this product yet.
